Disable Auto-Power Off

1. Press the [Menu] button on your device.

2. Use the menu options to go to Settings > Auto Power Off > Adapter.

3. Set the Auto Power Off option to Off.

Enable Auto Power ON Mode

Find Your Printer’s IP Address:

1. Press the [Menu] button and use the ▲/▼ arrows and the [OK] button to navigate to the WLAN tab.

2. Select WLAN Status.

3. Choose Infrastructure Mode.

4. Locate the IP Address:

• The screen will display your network settings.

• The IP address will be listed on the third line. If it shows 0.0.0.0, the printer is not connected to the network.

4. Enter the printer's IP address in a browser (e.g., http://10.0.0.138). 

This will open the printer’s web configuration utility.

Configure Auto Power On Settings:

1. Click on Printer Settings in the printer’s web configuration utility.

2. Adjust Power Settings:

• Set Auto Power On to Enable.

• Set Auto Power Off (AC/DC) to None.

3. Click Submit to save the settings.

By following these steps, you’ll ensure your printer is correctly set up for seamless use with Visitly. If you encounter any issues, feel free to contact our Support Team for assistance.