Getting Started

Connecting your Brother label printer with WiFi

779 views September 28, 2018 zvizier 3

Setting up your Brother label printer with your WiFi

These instructions apply to: Brother QL-820

  1. On the home screen of your printer (Keep pressing the back button until you get there), press “Menu”
  2. Press the down button until you see the WLAN option, then press OK
  3. With the arrows, highlight the WLAN (On/Off) option and press OK. Ensure “On” is selected and press OK
  4. Press OK to go back into the WLAN settings, highlight the Network Mode option and press OK
  5. Highlight the Infrastructure Mode option and press OK
  6. Press the down arrow until you highlight the Infra Manual Setting option and press OK
  7. Your printer will now search for a nearby WiFi
  8. Use the up/down arrows until you highlight your WiFi and press OK
  9. Use the Up, Down, and Menu buttons to type in the password for your WiFi
  10. Press OK when complete, and OK again to confirm. Your device will connect to your WiFi with the password provided
  11. If successful, it will say Successful!

 

If you run into any issues:

  1. Go back to the home screen (Keep pressing the back button until you get there)
  2. Press Menu
  3. Use the up/down arrows to select Administration and press OK
  4. Scroll down until you select Reset and press OK
  5. Scroll down until you select Network Reset and press OK
  6. Highlight Reset and press OK

Was this helpful?